« Brake booster and Steering wheel | Main | Engine Assembly continued »
February 06, 2013
Engine progress ahead!
OK, the stalemate between my budget and my engine has ended for now, so here is the rest of my engine!
From 440 source
440 Source Stealth aluminum heads
ARP head bolt set
Fel Pro head gaskets
Comp cams 10 deg locks and retainers
6 qt reproduction Hemi style pan
new 3/8 deep pan pick up tube
Melling HV oil pump
New dip stick and tube
New heater hose nipples
New SFI approved flex plate
From Summit
Lunati 60303 cam and lifter set
Summit true roller 3 bolt timing chain set
Carter 4845 fuel pump
Milodon high volume aluminum water pump
ARP flex plate bolts
ARP assembly lube
Mopar performance oil pump priming shaft
Milodon hardened oil pump drive shaft
Summit camshaft degree wheel
Felpro intake gasket set ( FEL-1215 with heat crossover blocked)
Mr. Gasket engine gasket kit
Extra Felpro oil pan gasket
I had some items arrived after I took the picture above, this is the rest.
From Mopar Ed at The Mopar Shop
Reproduction negative battery cable
Correct type PCV valve, and grommet
Correct type breather grommet
Items from other sources
Reproduction vapor separator
New Elgin rocker arms and shafts
Throttle return spring bracket
Mancini racing chromoly HD push rods
A huge thank you to all those who have helped guide my parts selection. I will soon have the heads looked over (the valves) and change out the locks - retainers, then I will start carefully bolting things together!
stay tuned...
Posted in 2004-present | RESTORATION | Reassembly | engine